Find a Solution

Find a Solution

Select a service line below to view all of the products/services specific to that service line. Select addtional filters if needed to narrow your search and find what you need. Or view the global library without any filters.

Displaying 1 - 10 of 20
Pace®-X800 Quad Design
Featuring the same advanced multi-well pad drilling capabilities of the PACE®-X800 rig, the PACE®-X800 quad design rig enables fewer connections due to an additional 31-foot section that allows for four joints of pipe in the setback.

Key Features

  • 186-foot mast height
  • 30,000 feet total capacity, including casing
  • 126-foot quad stand
PACE®-M800 Rig
As lateral lengths continue to increase, drillers need a rig with more power and greater tripping speed. Nabors PACE®-M800 rig features innovative advanced technologies that provide both.

Key Features

  • Three 1,600-horsepower mud pumps with 7,500 PSI to deliver high flow rates
  • 3,000 horsepower drawworks that enable trip speeds of 380 feet per minute
  • When drilling laterals at or greater than 7,500 feet, the PACE®-M800 rig’s racking capacity eliminates the need to lay down drill pipe between wells on the same pad. 
PACE®-M1000 Rig
As lateral lengths continue to increase, drillers need a rig with more power and greater tripping speeds. The PACE®-M1000 rig features innovative advanced technologies that provide both of these capabilities, while also improving rig move efficiency.

Key Features

  • Three 1,600-horsepower mud pumps deliver high flow rates when required and provide a backup pump if needed
  • A 7,500 PSI mud system provides the required pressure to maximize rate of penetration (ROP) while running rotary steerable systems or conventional mud motors during extended-reach laterals
  • A 1,150-horsepower top drive provides 51,400 ft-lbs continuous torque at 120 rpm
PACE®-R800
The PACE®-R800 rig utilizes technology optimized for drilling automation with Nabors Rigtelligent® control system. The rack and pinion technology enables the precise control of block position required for advanced automation.

Key Features

  • Rack and pinion hoisting system reduces mechanical components like drawworks, traveling block, crown, deadline anchor, drill line spooler etc., improving rig-up time and reducing downtime
  • Current hookload capacity rated at 800 kips can be scaled up to 1,000 kips
  • Custom designed pipe handling equipment to handle drill pipe and casing up to 13-3/8”
Managed Pressure Drilling
Nabors’ fit-for-purpose managed pressure drilling (MPD) equipment and integrated MPD-Ready® drilling rig maximizes efficiencies and makes MPD services more scalable and cost-effective for unconventional land drillers.
Drilling Data & Analytics
Nabors has developed a suite of software solutions designed to transform rig site data and analytics into wellsite knowledge. Drilling data is collected from various rig sources and then transmitted to customers in real-time through remote, mobile portals.
ROCKit<sup>®</sup> Pilot
The ROCKit Pilot system integrates critical downhole information needed for directional drilling and then automatically implements corrective instructions and steering logic during slide drilling operations.
Canrig<sup>®</sup> 1275 AC Top Drive
Developed for deep drilling applications, the Canrig® 1275 AC electric top drive is equipped with a four inch bore and 7,500 psi pressure rating. 

Key Features

  • Load Rating: 750 tons
  • Output Power (Continuous): 1,150 HP
  • Gear Ratio: 6.808:1/8.654:1
canrig 2000 catwalk
The Automated Power Catwalk 2000 from Canrig® is designed to individually index racked drill collars, drill pipe and casing into a center carrier where they can be lifted to the drill floor.
canrig 3000 catwalk
The Automated Power Catwalk 3000 from Canrig is designed to individually index racked drill collars, drill pipe and casing into a center carrier where they can be lifted to the drill floor.